| 53 NDT | |||
| Thiele Small parameters: | |||
| Nominal impedance | Zn | (ohm) | 4 |
| Minimum impedance/at freq. | Zmin | (ohm/Hz) | 3.7/3162 |
| Maximum impedance | Zo | (ohm) | 5.6 |
| DC resistance | Re | (ohm) | 3.4 |
| Voice coil inductance | Le | (mH) | 0.1 |
| Resonance Frequency | fs | (Hz) | 1413 |
| Mechanical Q factor | Qms | 2.17 | |
| Electrical Q factor | Qes | 3.48 | |
| Total Q factor | Qts | 1.34 | |
| Mechanical resistance | Rms | (Kg/s) | 1.18 |
| Moving mass | Mms | (g) | 0.29 |
| Suspension compliance | Cms | (mm/N) | 0.04 |
| Effective cone diameter | D | (cm) | 2.8 |
| Effective piston area | Sd | (cm²) | 6.2 |
| Force factor | Bl | (N/A) | 1.6 |
| Reference voltage sensitivity Re 2.83V 1m at 3162 Hz (Measured) |
(dB) | 91.7 |
53
NDT
53 NDT 26 25 SF FF 4 ohm - Order ID: 811434
The new neodymium dome tweeter from Peerless is based on an original soft dome fabric which so far has only been used to produce Peerless High End tweeters. The soft fabric material guarantees very smooth and extended frequency response combined with the well known sound quality from our other tweeters.
The powerful magnet system has been designed with emphasis on high temperature performance. The voice coil is cooled by ferrofluid to achieve low power compression. Furthermore, it is possible when dealing with very high power handling applications to fit a heat sink.
53 NDT 26 25 SF FF 4 ohm - Order ID: 811434
The new neodymium dome tweeter from Peerless is based on an original soft dome fabric which so far has only been used to produce Peerless High End tweeters. The soft fabric material guarantees very smooth and extended frequency response combined with the well known sound quality from our other tweeters.
The powerful magnet system has been designed with emphasis on high temperature performance. The voice coil is cooled by ferrofluid to achieve low power compression. Furthermore, it is possible when dealing with very high power handling applications to fit a heat sink.
